The 2016 BMW M3 is a performance sedan with a 3.0-liter inline-six engine, and its oil filter service helps keep engine oil cleaner as it circulates through that powertrain. At Herb Chambers BMW of Sudbury in Sudbury, MA, an oil filter replacement includes a filter matched to the engine's specification, a new drain plug gasket or washer where the engine uses one, and a leak check after the engine runs. The filter captures debris carried by the oil; when it becomes loaded, the bypass valve opens and unfiltered oil circulates. Booking an oil and filter service helps address that maintenance need with work suited to the vehicle actually being serviced.
What an oil filter replacement on a 2016 BMW M3 involves
An oil filter replacement for the 2016 BMW M3 begins with a filter matched to the engine's specification. That fit matters because the filter must work correctly with the engine's oil circulation system rather than being selected only by appearance. The service also includes a new drain plug gasket or washer where this engine uses one. Renewing that sealing piece supports a proper seal when the drain plug is refitted.
After the oil and filter work is completed, the engine is run so the filter seal can be checked for leaks. This final inspection helps confirm that the filter and related sealing surfaces are holding as intended before the vehicle leaves. The service is performed alongside the oil, not as an isolated filter change, because the filter collects the debris suspended in the oil. For the manufacturer's maintenance schedule, no interval is stated for this model year. When your 2016 BMW M3 is due for attention, schedule service at Herb Chambers BMW of Sudbury.
Why the filter matters on a 2016 BMW M3
The 2016 BMW M3 uses a 2,979 cc, 3.0-liter inline-six engine. As oil moves through that engine, it carries away debris created by normal operation. The oil filter holds that debris so the oil delivered through the lubrication system is cleaner. A filter is therefore more than a replaceable accessory: it is the component that captures material the oil has picked up while doing its job.
As the filter loads with debris, its bypass valve opens. That valve allows oil to keep moving, but the result is that the engine receives oil that is no longer being filtered. A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil, and that is worse in a quiet way. Replacing the filter with the oil change renews the filter's ability to capture debris instead of stretching one filter across two oil changes. This approach suits the demands of the M3's high-output inline-six without adding unsupported assumptions about faults or service intervals.
Oil and filter service at Herb Chambers BMW of Sudbury
Herb Chambers BMW of Sudbury provides oil and filter service for the 2016 BMW M3 at 128 Boston Post Road, Rte 20, Sudbury, MA 01776. The work focuses on the engine actually fitted to the vehicle: the replacement filter is matched to its specification, the applicable drain plug gasket or washer is renewed, and the filter seal is checked for leaks after the engine runs. That gives the service a clear purpose beyond simply removing old oil.
The service team can also help connect the filter replacement with the vehicle's maintenance needs. Because no maintenance interval is stated for this model year, the timing of service should be considered with the manufacturer's schedule, service history, and an inspection of the vehicle. You can schedule an appointment online or review service specials before booking. For assistance, call 508-978-2098.
Frequently Asked Questions
6 common questions answered
Is the oil filter replaced every time a 2016 BMW M3 has its oil changed?The oil filter should be replaced with the oil on the 2016 BMW M3 service described here.
The filter holds debris carried by the oil and can become loaded during use. Replacing it alongside the oil renews that filtration rather than carrying one loaded filter into another oil-change cycle. The correct timing for service should also consider the manufacturer's schedule and the vehicle's service history.
The filter is matched to the 3.0-liter inline-six engine.
A new drain plug gasket or washer is included where the engine uses one.
The filter seal is checked for leaks after the engine runs.
What is included in an oil filter replacement on a 2016 BMW M3?An oil filter replacement on the 2016 BMW M3 includes a matched filter, an applicable new drain plug gasket or washer, and a post-run leak check.
The filter is selected for the engine's specification rather than treated as a universal component. The sealing piece is renewed where applicable when the drain plug is refitted. After the engine runs, the filter seal is checked for leaks so the completed service can be inspected.
Filter matched to the engine's specification.
New drain plug gasket or washer where required by the engine.
Inspection for leaks at the filter seal after running the engine.
What happens if the oil filter on a 2016 BMW M3 is not replaced?If the oil filter on a 2016 BMW M3 is not replaced, debris can load the filter until its bypass valve opens and unfiltered oil circulates.
A loaded filter does not necessarily stop oil flow; the bypass valve allows oil to keep moving. The concern is that the oil is then circulating without the filter's debris-catching function. Oil that darkens quickly after a change, an oil-pressure warning, or an engine that sounds noisier than usual are reasons to arrange an inspection.
The filter can retain debris picked up by the oil.
The bypass valve can open as the filter loads.
Unfiltered oil can circulate through the engine.
Does a 2016 BMW M3 need a specific oil filter?Yes, the filter is matched to the 2016 BMW M3's 2,979 cc, 3.0-liter inline-six engine, and filters are not interchangeable across engines.
Filter selection depends on the engine actually fitted to the vehicle and the way its oil system is designed. A filter that is suitable for another engine should not be assumed to be suitable for this one. The service uses a filter matched to this engine's specification without relying on a universal fit.
Engine layout: inline-six.
Displacement: 2,979 cc.
Engine size: 3.0 liters.
Can the oil be changed on a 2016 BMW M3 without changing the filter?The oil can be changed without replacing the filter, but the oil and filter service replaces the filter at the same time.
The filter collects debris from the oil, so leaving it in place carries that filter into the next service cycle. As it loads, its bypass valve can open and allow unfiltered oil to circulate. The appropriate service timing should be determined using the manufacturer's schedule, the vehicle's service history, and an inspection where needed.
Oil carries debris away from engine components.
The filter holds that debris during circulation.
Replacing the filter renews the filtration function with the oil.
How do I book an oil and filter service at Herb Chambers BMW of Sudbury?You can book an oil and filter service at Herb Chambers BMW of Sudbury by using the online schedule service form or calling 508-978-2098.
The dealership is located at 128 Boston Post Road, Rte 20, Sudbury, MA 01776. When booking, identify the vehicle as a 2016 BMW M3 so the service can be matched to its 3.0-liter inline-six engine. You can also review current service specials before arranging the visit.
